Acer DD550A Manuel d'utilisateur

DD55055” Dual Side DisplayUser Manual(English)V1.1

Installation NotesPlease make sure you have a solid installation. As shown in the picture.You can install the display set by screws x 8 (M4x15mm)10

Package ContentPackage ContentUnpacking• This product is packed in a carton, together with the standard accessories.• Due to the size and weight of th

AccessoriesDual Side Display x1PC Box x1(with 24V&12V line)12Dual Side Display x1(with 24V&12V line)Remote Controller x1(Battery : CR 2025 3V)

Over ViewFront ViewTop ViewDiagonal View 13Side View

Over View124141. Display (Dual side)2. Display Set3. Remote control sensor (Dual side)4. Use hole x 8 (single side have 4)5. I/O cover x 3 53

Setting Up The Display Setting Up The Display Step1 : Putting the dual side display upside15While the display put upside , the screw will be seen on t

Step2 : Remove the three I/O covers on the sides16Remove I/O cover screws x 3(M3x6mm)

Step3 : Remove the downside coverTear down the downside cover.screws x 10(M3x6mm)17screws x 10(M3x6mm)

Step4 : Connect Power Box to Dual Side Display24V*1Red line218Power BoxDual Side DisplayRed line(10 pin)12V*1Yellow line(8 pin)1

Connect the 24V (10 pin) power line 1Connect the 12V (8 pin) power line 2Step4 : Connect Power Box to Dual Side Display1912V*1Yellow line(8 pin)24V*1R

• Important Safety Instructions………………………….3– Safety precautions and maintenance………………...3– Use………………………………………………………………6– Installation Notes……

Step5 : Connect by HDMI connectorPlug two HDMI cables into the cabinet.And ensure that all cable plugs are firmly fitted to the equipment jacks.20HDMI

Step6 : Reinstall the downside cover and I/O coversReinstall the downside 211Reinstall the downside cover.screws x 10(M6x30mm)Reinstall the other two

AC in / switchAC in / switchAC in / switchAC in / switchStep7 : Connect the power cordPower Box22Plug in the power cable and turn on the AC power swit

Step8: Using the Remote Control1234523No. Key DescriptionsPower Power on/Power offMenu Into OSD moduleMenu UpMenu DownExit Menu/Exit selection13245

OSD Setting MenuPress “MENU” into the OSD Setting Menu, and then press “UP” or “DOWN” to select the item, at last press “EXIT” to leave menu : 24Lumi

Press “MENU” into the OSD Setting Menu, and then press “UP” or “DOWN” to select the item, at last press “EXIT” to leave menu : 25ColorPress MENU to s

Press “MENU” into the OSD Setting Menu, and then press “UP” or “DOWN” to select the item, at last press “EXIT” to leave menu : 26OSD SettingsPress ME

Press “MENU” into the OSD Setting Menu, and then press “UP” or “DOWN” to select the item, at last press “EXIT” to leave menu : 27SetupPress MENU to s

Trouble shootingTrouble shootingSymptom Possible Cause RemedyNo picture is displayed1. The power cord is disconnected.2. The main power switch on the

LCD Display 55”Model name DD550Screen size55 inch (diagonal)Resolution1920 x1080 (Pixel)Display Area1209.6(H) x 680.4(V) Contrast Ratio 4000:1Brightne

Safety precautions and maintenanceWARNING: Use of control, adjustments or procedures other than those specified in this documentation may result in ex

Product DimensionsProduct Dimensions30A,B,C: I/O covers

Safety precautions and maintenanceMaintenance:• To protect your display from possible damage, do not put excessive pressure on the display. • Unplug t

Safety precautions and maintenanceRead and follow these instructions when connecting and using your display:• Unplug the display if you are not going

Use• Don’t turn the ventilation hole of Power Box upside down. As shown in the picture below.The ventilation hole of power box6It is prohibited to pla

Use• When you install the display, please don’t use the “bottom side” I/O hole and open the I/O cover . As shown in the picture below.The “bottom side

UseRemote Controller Precautions:• This product requires remote switch (ON/OFF) from Front Side ; the Back Side only has OSD function operated by remo

Installation NotesF9There have 8 use holes on the side of the display set (M4x15mm)