Acer PCI Disk Array Controller Drivers 08P4100 Manuel d'utilisateur télécharger pdf (Page 74)

Overview

6-2 Manual No. 775079

Special Notes

• In order for UnixWare 2.1.2 and below to detect a Mylex multifunction

controller such as a DAC960PG, DAC960PJ, DAC960PR,

DAC960PT, etc., UnixWare 2.1.2 and below must have a

“multifunction PCI Driver” loaded.

• In order to install a Mylex multifunction controller, a driver diskette

must be created from the CD-ROM. See “Creating a Driver Diskette

for UnixWare” on page 6-3.

• If using a Mylex multifunction controller as a primary controller

please refer to “Installing the Mylex Disk Array Controller as the

Primary UnixWare Controller with UnixWare 7.x/2.1.3” on page 6-3.

• If using a Mylex multifunction controller as a secondary controller

please refer to “Installing the Mylex Disk Array Controller as the

Secondary UnixWare Controller with UnixWare 7.x/2.1.3” on page 6-

• If using a Mylex multifunction controller as a primary controller,

please refer to “Installing the Mylex Disk Array Controller as the

Primary UnixWare Controller with UnixWare 2.1.2” on page 6-6.

• If using a Mylex multifunction controller as a secondary controller,

please refer to “Installing the Mylex Disk Array Controller as the

Secondary UnixWare Controller with UnixWare 2.1.2” on page 6-8.

1. “Primary” indicates that a controller’s storage device will be the

boot device for UnixWare installation.

2. “Secondary” indicates that the controller is not the bootable

device for the UnixWare operating system.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 99 100

Pas de commentaire

Acer PCI Disk Array Controller Drivers 08P4100 Manuel d'utilisateur Page 74