Acer KB.I0800.004 Informations techniques télécharger pdf (Page 152)

142 Chapter 4

If the POST or video appears on the external display, see “LCD Failure” on page 143.

5. Disconnect power and all external devices including port replicators or docking stations. Remove any

memory cards and CD/DVD discs. Restart the computer.

If the computer boots correctly, add the devices one by one until the failure point is discovered.

6. Reseat the memory modules.

7. Remove the drives (see “Disassembly Process” on page 40).

8. If the Issue is still not resolved, see “Online Support Information” on page 193.

Abnormal Video Display

If video displays abnormally, perform the following actions one at a time to correct the problem.

1. Reboot the computer.

2. If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty and

should be replaced. See “Disassembly Process” on page 40.

3. If extensive pixel damage is present (different colored spots in the same locations on the screen), the LCD

is faulty and should be replaced. See “Disassembly Process” on page 40.

4. Adjust the brightness to its highest level. See the User Manual for instructions on adjusting settings.

NOTE: Ensure that the computer is not running on battery alone as this may reduce display brightness.

If the display is too dim at the highest brightness setting, the LCD is faulty and should be replaced. See

“Disassembly Process” on page 40.

5. Check the display resolution is correctly configured:

a. Minimize or close all Windows.

b. If display size is only abnormal in an application, check the view settings and control/mouse wheel

zoom feature in the application.

c. If desktop display resolution is not normal, right-click on the desktop and select

Personalize´ Display Settings.

d. Click and drag the Resolution slider to the desired resolution.

e. Click Apply and check the display. Readjust if necessary.

6. Roll back the video driver to the previous version if updated.

7. Remove and reinstall the video driver.

8. Check the Device Manager to determine that:

• The device is properly installed. There are no red Xs or yellow exclamation marks.

• There are no device conflicts.

• No hardware is listed under Other Devices.

9. If the Issue is still not resolved, see “Online Support Information” on page 193.

10. Run the Windows Memory Diagnostic from the operating system DVD and follow the onscreen prompts.

11. If the Issue is still not resolved, see “Online Support Information” on page 193.

Random Loss of BIOS Settings

If the computer is experiencing intermittent loss of BIOS information, perform the following actions one at a

time to correct the problem.

1. If the computer is more than one year old, replace the CMOS battery.

2. Run a complete virus scan using up-to-date software to ensure the computer is virus free.

3. If the computer is experiencing HDD or ODD BIOS information loss, disconnect and reconnect the power

and data cables between devices.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 207 208

Commentaires sur ces manuels

Pas de commentaire

Acer KB.I0800.004 Informations techniques Page 152

Commentaires sur ces manuels

Produits connexes et manuels pour Claviers Acer KB.I0800.004