Acer ALH-316ds/324ds Guide de l'utilisateur télécharger pdf (Page 10)

2.4 Rack mounting

To install the ALH-316ds/324ds hub in a 19-inch rack, please follow these steps:

1. If the hub has rubber footpads on the bottom of the unit, please

remove them.

2. Locate the rack mounting holes on both sides of the hub

(see Figure 2- 6).

3. Using a cross-head screwdriver, attach the two mounting brackets to

both sides of the hub with the four screws supplied with the unit

(see Figure 2- 6).

4. Place the hub in the rack and align the holes in the mounting bracket

with the holes in the rack chassis (see Figure 2- 7).

5. Insert two mounting screws (the rack-mount equipment should provide

these screws), into each of the mounting brackets and tighten with a

suitable screwdriver.

Figure 2-6: Attaching mounting brackets (8 screws: M3x5)

Figure 2-7: Attaching mounting brackets for a rack mount (4 screws: M5x10)

Note: The pannel wall should be able to bear three times of the system's

weight

update ALH-316_324UM.qxd 11/10/99 8:42 AM ›¶›– 7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Pas de commentaire

Acer ALH-316ds/324ds Guide de l'utilisateur Page 10