Acer B235HL Manuel d'utilisateur télécharger pdf (Page 14)

EN-13

INSTALLATION

To install the monitor to your host system, please follow the steps as given

below:

Steps

1.1-1Connect Video Cable

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the VGA video cable to the computer.

1-2

a. Make sure both the monitor and computer are powered-OFF.

b. Connect one end of the 24-pin DVI cable to the back of the

monitor and connect the other end to the computer’s port.

. Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer.

This

sequence is very

important.

If the monitor still does not function properly, please refer to the

troubleshooting section to diagnose the problem.

Connect the digital cable (only for dual-input models).

HDMI

DC IN

D-SubDVI

Connect the adapter

a Connect the AC cord to the adapter.

b Connect one end of the adapter to the monitor and the other end to

a properly

grounded, AC outlet

HDMI Cable (Only HDMI-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the HDMI cable to the computer.

HDMI

DVI

D-Sub

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 24 25

Pas de commentaire

Acer B235HL Manuel d'utilisateur Page 14