Acer S200HQL Manuel d'utilisateur télécharger pdf (Page 1)

LCD Monitor Quick Setup Guide

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1 To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely

damage it.

3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform

servicing of any nature.

5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor

outside this range may result in permanent damage.

6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Package contents

LCD monitor

AC Power

cable

DVI cable

(Optional)

VGA cable AC Adapter

User guide

Quick start guide

Attaching the monitor to the base

1 Remove the monitor base from the packaging and place it on a stable and level workspace.

2 Remove the monitor from the packaging.

3 Attach the monitor stand arm to the base.

• Ensure that the base is locked onto the monitor stand arm. (for selected models)

•

Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin.

(for selected models)

Connecting your monitor to a computer

1 Turn off your computer and unplug your computer’s power cord.

2 Connect the signal cable to the VGA and/or DVI-D (optional) input

socket of the monitor, and the VGA and/or DVI-D (optional) output

socket of the graphics card on the computer. Then tighten the

thumbscrews on the signal cable connector.

3 Connect one end of the adapter to the monitor and the other end

to a properly grounded, AC outlet.

4 Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Panel controls

No. Item Description

1 Power button/

indicator

Turns the monitor on/off. Blue indicates

power on. Blinking blue indicates standby/

power saving mode.

< / > button Press the < / > button to navigate to the

desired function or to change the settings of

the current function.

3 Menu/Enter

button

Press to view the OSD menu. Press it again to

enter a selection in the OSD menu.

4 Auto/Exit

button

• When the OSD menu is active, press this

button to exit the OSD menu.

• When the OSD menu is inactive, press this

button to activate the Auto Adjustment

function.

5 Empowering

Key

Press this button to open the Acer eColor

Management OSD and access the scenario modes.

This CD contains

• User’s manual

• Quick Start Guide

• Acrobat Reader

• Register your product

WWW.acer.com

S200HQL

LCD Monitor

P/N:MU.LXB00.001

AUDIO IN

DC-IN

DVI-D IN

VGA IN

VGA

Optional: Connect the audio input socket (AUDIO IN) of the

LCD monitor and the line-out port on the computer with the

audio cable.

1 2

Résumé du contenu

Page 1 - DVI-D IN

LCD Monitor Quick Setup GuideEnglishAcer LCD Monitor Quick Start Guide (QSG)Important safety instructionsPlease read the following instructions carefu

Page 2 - LCD Monitor Quick Setup Guide

LCD Monitor Quick Setup GuideEnglishRegulations and safety noticesFCC noticesThis device has been tested and found to comply with the limits for a Cla