Acer PW730 Spécifications télécharger pdf (Page 38)

English ...

Appendices

Replacing the lamp

The projector will detect the lamp life itself. It will show you a

warning message “Lamp is approaching the end of its useful

life in full power operation. Replacement Suggested!” When

youseethismessage,changingthelampassoonaspossible.

Makesuretheprojectorhasbeencooleddownforatleast30

minutes before changing the lamp.

Warning:

Lamp

compartment is

hot! Allow it to

cool down before

changing lamp!

Warning:

reduce the risk of

personalinjury,do

not drop the lamp

module or touch

the lamp bulb. The

bulb may shatter

and cause injury if

it is dropped.

Lamp Changing Procedure:

1. TurnthepowerofftheprojectorbypressingthePowerbutton.

2. Allowtheprojectortocooldownatleast30minutes.

3. Disconnect the power cord.

4. Removethecover.



5. Push up and remove the cover.



6. Remove the 3 screws from the lamp module.



7.Pulloutthelampmodule.



To replace the lamp module, reverse the previous steps to restore.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Pas de commentaire

Acer PW730 Spécifications Page 38