Acer F900 Manuel d'utilisateur télécharger pdf (Page 67)

Chapter 4 1

Diagnostics and Troubleshooting

Using DebugSwitcher Function Testing

RUN IN and Discharge Tests

NOTE:

• Wear anti-static gloves.

1. Insert the battery, battery cover and charger in to the handset

and power on.

2. Tap LED and wait for the keypad LED to light. Tap OK to test.

3. Tap BurnIn Test for Run in testing.

4. When the screen shows PASS the handset has passed all

tests,

5. Check if the handset LED always lights green. If yes, handset

passed.

6. Check if the temperatures of the handset, battery and charger

are OK and not too high. If the temperature is excessively

high, the handset failed.

7. If the handset, battery and charger is OK, take the charger

off.

8. Unplug the travel charger and go back to the Debugswitcher

display. Click the DCB to discharge the battery.

9. After discharge, check if the battery capacity is less than 55%

and if the screen shows Pass. If so, the handset passed.

10. Check if the handset and battery temperature is excessively

high. If not, the handset passed.

Chapter 4

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 87 88

Pas de commentaire

Acer F900 Manuel d'utilisateur Page 67