Acer B273HU Manuel d'utilisateur télécharger pdf (Page 15)

EN-14

INSTALLATION

To install the monitor to your host system, please follow the steps as given

below:

Steps

1.1-1Connect Video Cable

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the VGA video cable to the computer.

1-2Digital Cable (Only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect one end of the 24-pin DVI cable to the back of the

monitor and connect the other end to the computer’s port.

1-3HDMI Cable (Only HDMI-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the HDMI cable to the computer.

2. Connect the Audio Cable(Only Audio-Input Model)(Optional)

3. Connect the USB Cable(Only USB-Input Model)(Optional)

4.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC

outlet.

5.Power-ON Main power switch

6.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer.

This sequence is very important.

7.If the monitor still does not function properly, please refer to the

troubleshooting section to diagnose the problem.

Main power switch

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Pas de commentaire

Acer B273HU Manuel d'utilisateur Page 15