Acer ALH-616ds Manuel d'utilisateur télécharger pdf (Page 12)

2.1.5 Plug the power cord into the outlet on the wall and check if the power

LED lights up. If it lights up, then the hub is ready to be connected to the

network, as shown in Figure 2-5.

Figure 2-5 Power on the hub and make it ready

2.2 Installing the hub on your working surface

You have to find a solid working surface to place the hub and make sure the

equipment is not close to any high voltage power source or over-heated

sources. Also keep away from electronic equipment sensitive to electronic

interference. The brief procedures of installing your hub should be:

2.2.1 Put the hub on a stable working surface, as shown in Figure 2-6.

2-4

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Pas de commentaire

Acer ALH-616ds Manuel d'utilisateur Page 12