Acer DV650C Manuel d'utilisateur télécharger pdf (Page 13)

Setting Up the Display 11

Connecting Audio/Video Signals

Pay attention to the following notes when you connect cables:

• Please turn off all devices.

• Familiarize yourself with the audio/video ports on the display and the devices you

want to use. Be aware that incorrect connections may adversely affect picture

quality.

• Do not remove cables from the ports by pulling the cable itself. Always grasp and

pull the connectors at the end of the cable.

• Ensure that all cables are fully inserted and firmly seated.

Connecting the VGA Input

1. Connect the VGA IN jack on the display to the VGA output jack on a computer

using a Mini D-Sub (15-pin) cable.

2. Connect the computer’s audio output jack to the AUDIO IN (AUDIO1) jack on the display

using a suitable audio cable.

3. If a second display is used, connect the VGA OUT jack on the first display to the

VGA IN jack on the second display using a Mini D-Sub (15-pin) cable. This relays

the VGA input signal from the first display to the second one.

4. To view images from this input, press the

VGA button on the remote control.

First display

Second display

Mini D-Sub (15-pin)

cable

Mini D-Sub (15-pin)

cable

Audio cable

Computer

*The audio cable is not supplied and should be purchased separately.

Note:

Connector locations on the control panel may differ depending on the model.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

Pas de commentaire

Acer DV650C Manuel d'utilisateur Page 13