Acer Altos G700 Manuel d'utilisateur télécharger pdf (Page 48)

3 Upgrading the system

3 Open the system according to the instructions on page 39.

4 Follow the ESD precautions described in this section when

handling a server component.

5 Remove any expansion board(s) or peripheral(s) that block access

to the DIMM socket or other component connector.

See the following sections for specific installation instructions on the

component you want to install.

Warning! Failure to properly turn off the server before you

start installing components may cause serious damage. Do

not attempt the procedures described in the following

sections unless you are a qualified service technician.

Post-installation instructions

Observe the following after installing a server component:

1 See to it that all components are installed according to the

described step-by-step instructions.

2 Reinstall any expansion board(s) or peripheral(s) that you have

previously removed.

3 Reinstall the air baffle.

4 Reinstall the chassis panels.

5 Connect the necessary cables.

6 Turn on the system.

BB!H811!.!FO/cppl!!Qbhf!49!!Npoebz-!Efdfncfs!27-!3113!!7;55!QN

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 121 122

Pas de commentaire

Acer Altos G700 Manuel d'utilisateur Page 48