Acer CB241HQK Manuel d'utilisateur télécharger pdf (Page 21)

English

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1 Connect the video cable

a Make sure both the monitor and computer are switched off.

(1) Make sure both the monitor and computer are switched off.

(2) Connect one end of the 24-pin DVI cable to the back of the

monitor and the other end to the computer's port.

2 Connect the power cord

Connect the power cord to the monitor, then to a properly grounded AC

outlet.

Turn on the monitor and computer

Turn on the monitor first, then the computer. This sequence is very

important.

If the monitor does not function properly, please refer to the

troubleshooting section to diagnose the problem.

Connect the digital cable (only for DP models).

(1) Make sure both the monitor and computer are switched off.

(2) Connect one end of the 20-pin DP cable to the back of the

monitor and the other end to the computer's port.

Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor

and the line-out port on the computer with the audio cable.

HDMI Cable (Only HDMI or MHL Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the HDMI or MHL cable to the computer.

b Connect the digital cable (only for dual-input models).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Acer CB241HQK Manuel d'utilisateur Page 21